
Here you will find answers to general questions about SkamoWall
- SkamoWall Board
- SkamoWall Bore
- SkamoWall Wedge
- By regulating moisture problems
- By eliminating mold
Yes.
We recommend a combination of DYRUP Silikat Primer V and DYRUP Inde Silikat paint.
Skamol recommends using stainless steel screws.
Skamol recommends stainless steel nails.
SkamWall’s fire resistance is classed as the highest requirement level A1 according to the European fire classification system EN 13 501.
This means that SkamoWall Board is classified as a non-flammable material.
All SkamoWall calcium silicate products:
Have an EPD (Environment Product Declaration), which has been verified by a third party and published through EPD Denmark.
Find out more about the EPD (Environmental Product Declaration) here.
SkamoWall ensures an improved indoor climate:
SkamoWall can be mounted by both private individuals and craftsmen.
Find installers with extensive experience in mounting SkamoWall here.
All hardware stores can order SkamoWall.
For the sake of diffusion openness, we recommend sanding down the paint after applying 5 coats ofthe recommended paint.
Yes, but only after Skamol Lime Mortar or Skamol Smooth Plaster has been applied.
We recommend a combination of DYRUP Silikat Primer V and DYRUP Inde Silikat paint.
SkamoWall can be mounted in wet rooms, such as bathrooms, with the condition that the splash area is covered with tiles.
At least 50cm above or adjacent to the splash area must be free of tiles.
In extreme cases, it will be noticeable.