---
title: "Smooth plaster for SkamoWall"
site: "Homepage"
description: "Skamol Smooth Plaster is a ready-to-use smooth plaster for SkamoWall Boards. Easy to mix, apply and level for a durable, fine-grained finish."
url: "https://skamowall.com/products/skamol-smooth-plaster/"
language: "en-US"
---

![Skamol Smooth Plaster](https://skamowall.com/media/mgjnk4xu/skamol-smooth-plaster.png?width=1000&height=1000&v=1d9407f265ca3d0&rmode=pad)

# Skamol Smooth Plaster

Skamol Smooth Plaster is made for finishing Skamol calcium silicate boards and is used daily by installers who need a surface they can rely on. It gives a smooth, even result and holds up well over time, whether the project is a renovation or a new build. When the boards are properly primed and free from dust, the plaster bonds securely and creates a solid base for the next stage of work.

A 15 kg bag is mixed with roughly 5.5 to 6.5 litres of clean water. At a 2mm layer thickness, one bag will cover about 7.5 m², although actual coverage may vary slightly depending on the surface and application method. The material works best in temperatures between +5°C and +25°C. Standard clean tools are recommended to ensure a consistent finish.

The formulation includes Portland cement and calcium hydroxide. A built-in reducing agent helps limit soluble chromium VI levels and remains effective for up to 12 months from the date of manufacture indicated on the packaging, when the product is stored in dry and dark conditions. Once opened, bags should be sealed properly and used as soon as possible, particularly in humid environments.

1. Remove dust from the surface of the mounted [SkamoWall Board](https://skamowall.com/products/skamowall-board/).
2. Apply [Skamol Primer](https://skamowall.com/products/skamol-primer/) to the surface of the SkamoWall Board.
3. Wait approx. 30 minutes for Skamol Primer to dry.
4. Mix the Skamol Smooth Plaster in a ratio of approx. 6L of clean water per 15kg bag.
   - Pour 4L of water into a mixing bucket.
   - Add the entire contents of the Skamol Smooth Plaster bag while stirring vigorously.
   - Add the remaining water (about 2L) to the mixture until the desired consistency is achieved.
   - Stir vigorously for at least 5 minutes.
   - Let the mixture rest for about 15 minutes and stir again until the mixture is completely smooth and free of bubbles.
   - After mixing, the Skamol Smooth Plaster can be used for approx. 1 hour.
5. Apply Skamol Smooth Plaster in a thickness of 2 to 3mm before levelling the plaster.
6. If the hardened Skamol Smooth Plaster is uneven, sand and apply Skamol Smooth Plaster in a thickness of 2mm to 3mm. This can be repeated until the desired surface is achieved.

[Find out more about mounting here.](https://skamowall.com/skamowall/mounting-instructions/)

[Brochure](https://skamowall.com/media/s1bcrxqe/skamowall-uk.pdf)

[Mounting instructions](https://skamowall.com/media/h14nlljs/skamowall-mounting-instruction-uk.pdf)

[Data sheet](https://skamowall.com/media/3krjpahq/skamol-smooth-plaster-uk.pdf)

[Safety data sheet (SDS)](https://skamowall.com/media/24wdw3vc/skamol-smooth-plaster-uk.pdf)

#### Bag contents

15kg

####  Size of bag

400 × 250 × 120mm

####  Yield

7.5m²

####  Storage

Store in a cool and frostproof place.

####  Contains

- Portland cement
- Calcium hydroxide

- What is Skamol Smooth Plaster?
  [Skamol Smooth Plaster](https://skamowall.com/products/skamol-smooth-plaster/) is a smooth plaster, used as a finishing plaster on [SkamoWall Board](https://skamowall.com/products/skamowall-board/).

  What is the yield of one bag of Skamol Smooth Plaster?
  A 15kg bag is enough for approximately 7.5m² in 2mm thickness.

  At what thickness should Skamol Smooth Plaster be applied?
  We recommend applying Skamol Smooth Plaster in a layer of 2 mm.

  What is the shelf life of a bag of Skamol Smooth Plaster?
  An unopened bag of Skamol Smooth Plaster can be kept for 12 months from the date of packaging indicated on the bag.

  Skamol Smooth Plaster should be stored in the original packaging in a dry and dark place. Protect from moisture and negative temperatures.

  At what temperature can Skamol Smooth Plaster be applied?
  Skamol Smooth Plaster must be applied at a temperature between +5°C and +25°C.

  Can Skamol Smooth Plaster be applied on other products?
  Skamol Smooth Plaster is specially developed for Skamol, and we only recommend it for selected Skamol systems.

UFI code 31S2-308K-500F-NYKM

- Causes serious eye damage.
- Causes skin irritation.
- May cause respiratory irritation.
- May cause an allergic skin reaction.
- If medical advice is needed, have product container or label at hand.
- Stored out of reach of children.
- Wear protective gloves/protective clothing/eye protection/face protection.
- If in eyes:
  - Rinse cautiously with water for several minutes.
  - Remove contact lenses, if present and easy to do.
  - Continue rinsing.
  - Immediately call a poison center/doctor.
- Dispose of contents/container in accordance with local regulations.

Contains a reducing agent which reduces soluble chromium VI.

The reducing agent is active when stored in a dry place for 12 months after the stated packing date.

When stored in moist conditions, e.g. on construction sites, the chromate neutralisation will wear off.

Packing that has been opened should be closed tightly after use, and the product should be used as soon as possible.

## Application of Skamol Smooth Plaster

## Other SkamoWall products

[![SkamoWall Board](https://skamowall.com/media/nzzl53qj/skamowall-board.png?width=500&height=500&v=1d9407f8ea347f0&rmode=pad) SkamoWall Board SkamoWall Board is a calcium silicate board that ensures an improved indoor climate. SkamoWall Board must be mounted with the associated system-specific products to ensure the best results and to validate the warranty. All SkamoWall calcium silicate products have an EPD (Environment Product Declaration) which has been verified by a third party and published through EPD Denmark.](https://skamowall.com/products/skamowall-board/)

[![SkamoWall Bore](https://skamowall.com/media/2d2h4hmx/skamowall-bore.png?width=500&height=500&v=1d940801c10e0c0&rmode=pad) SkamoWall Bore SkamoWall Bore is a bore used at the sides and top of windows. Like SkamoWall Board and SkamoWall Wedge, SkamoWall Bore is made of calcium silicate, which ensures an improved indoor climate. All SkamoWall calcium silicate products have an EPD (Environment Product Declaration), which has been verified by a third party and published through EPD Denmark.](https://skamowall.com/products/skamowall-bore/)

[![Skamol Corner](https://skamowall.com/media/4qsl1pn3/skamol-corner.png?width=500&height=500&v=1d94080d4bcb9f0&rmode=pad) Skamol Corner Skamol Corner is a corner protector.](https://skamowall.com/products/skamol-corner/)

[![Skamol Lime Mortar](https://skamowall.com/media/ytvdhiry/skamol-lime-mortar.png?width=500&height=500&v=1d9efc1169413b0&rmode=pad) Skamol Lime Mortar Skamol Lime Mortar is a lime-based ready-to-use product that can be used as both an adhesive and plaster when mounting SkamoWall. Mix a 20kg bag with approx. 4.2L of clean water for about 7 minutes, yielding 2.5m² as an adhesive (7mm) or 7m² as plaster (2mm). The work must be carried out within a temperature range of +5°C to +25°C. Use clean tools and make sure that the surface of the substrate is free of dust before applying the product. Store the product in its original packaging in a dry and dark place. Protect against moisture and negative temperatures. It can be used for 24 months from the date of manufacture indicated on the packaging.](https://skamowall.com/products/skamol-lime-mortar/)

[![Skamol Mesh](https://skamowall.com/media/s5zfdb1s/skamol-mesh.png?width=500&height=500&v=1d9407f25540d70&rmode=pad) Skamol Mesh Skamol Mesh is a reinforcing mesh used only when mounting SkamoWall in buildings exposed to many major vibrations such as railroad tracks.](https://skamowall.com/products/skamol-mesh/)

[![Skamol Primer](https://skamowall.com/media/uckhh4mh/skamol-primer.png?width=500&height=500&v=1d9407f25f863c0&rmode=pad) Skamol Primer Skamol Primer is a ready-to-use primer that is applied to SkamoWall Board. Skamol Primer is a water-soluble primer made from colloidal silica. Skamol Primer improves adhesion and thus forms a good foundation for subsequent treatment. It should not be used if the temperature is below 5°C. Store the product in its original, unopened packaging in a cool, but frostproof place. It can be used for 24 months from the date of manufacture indicated on the packaging. The product is ready for use. 1L is sufficient for 5m². Drying time is approximately 30 minutes.](https://skamowall.com/products/skamol-primer/)

[![SkamoWall Wedge](https://skamowall.com/media/y1sp23se/skamowall-wedge.png?width=500&height=500&v=1d9408085e2dfd0&rmode=pad) SkamoWall Wedge SkamoWall Wedge is a wedge used as a border between the wall and ceiling. Similar to SkamoWall Board and SkamoWall Bore, SkamoWall Wedge is made of calcium silicate, which ensures an improved indoor climate. All SkamoWall calcium silicate products have an EPD (Environment Product Declaration), which has been verified by a third party and published through EPD Denmark.](https://skamowall.com/products/skamowall-wedge/)

# Planning the finishing layer with Skamol Smooth Plaster?

Our smooth‑plaster specialists help ensure the desired surface finish
